Cable Fittings

  • Suspension Clamp

    Suspension Clamp

    Specification: Suspension clamps are used to hang conductors or ground wires to insulators or link fittings to tower arms and substation structures. Suspension clamps are made of Aluminum Alloy or Malleable Iron materials with various types. Custom size and requirements are available upon request. General Material-Body Aluminum Alloy, Steel Material-Bolt Galvanized Steel Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires ...

  • Hot Line Tap Clamp

    Hot Line Tap Clamp

    Hot Line Tap Clamp is a common fittings in powerline and transmission line system. We have many types hot line tap clamp to match our clients’ requirements. General Material-Body Aluminum Alloy Material-Eye Bolt Stainless Steel Material-Eye Connector Bronze The technical specification This specification includes the design and construction of tension clamps for aluminum conductors at terminal and cross-sectional terminals. Clamps are suitable for use in tropical areas with maximum a...

  • Tension Dead End Anchor Clamp

    Tension Dead End Anchor Clamp

    Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...

  • Thimble Guy

    Thimble Guy

    The guy thimble is widely used on electric power line or dead-end pole line. The cable thimble usually connects with the preformed tension clamp to support and protect the ADSS/OPGW cable. It is also used on stay rod to connect the guy wire. General Material-Body Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel fo...

  • Strain Clamp

    Strain Clamp

    Specifications: Strain clamps are used to fix conductors and ground wires to insulators or link fittings to tower arms and substation structures. There are two basic systems of strain clamps, 1. Detachable clamps, such as wedge-type tension clamps, thimbles, bolted type tension clamps, which allow for subsequent adjustment. 2. Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length. The type of strain clamps are including NLL-1, NLL-2...

  • Straight Clamp

    Straight Clamp

    Straight Clamp is a common hardware in powerline and transmission line system. We offer many types Straight Clamp for our clients. General Material-Body Aluminum Alloy Material-Bolt Galvanized Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or larg...

  • Preformed Line

    Preformed Line

    Preformed Line is a major hardware in powerline and transmission line system. We offer full type and sizes of preformed line for our clients. General Material-Body Galvanized Steel, Aluminum Alloy  Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires to poles or walls. The clamp consists of a body, a wedge and a movable and adjustable clamp or gasket. A core anchor clip is designed to support neutral messengers, and the wedge...

  • Piercing Clamp

    Piercing Clamp

    Specification: General of insulation piercing connector (IPC) 1.Piercing connector, simple installation, need not strip the cable coat. 2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5.Small electric connecting resistance, connecting...

  • PG Clamp

    PG Clamp

    Specification: PG clamp is known for parallel groove clamp, especially used in transmission line to hold transmission conductors in parallel. PG Clamp solutions offered provides for secure holding support of transmission conductors. These parallel groove clamps come with features like high corrosion-resistance, aluminum alloy construction in hot forged finish, stainless steel based bolts & nuts in hot-dip galvanized finish, corrosion protected washer support, precision developed pressure ...

  • Cable Lug

    Cable Lug

    Cable lug is designed that can hold a different type of wires so that your electrical connection will be easier. This allows you to connect thick cables to a connector with a smaller diameter you possibly have. Safer Connection. Cable Lug was invented so that it ensures the electrician and the users’ safety. We have full type and size of cable lug for our clients. General Material-Body Aluminum Alloy, Copper A core anchor clip is designed to support neutral messengers, and the wedge can...

  • Anchoring Wedge Clamp

    Anchoring Wedge Clamp

    Anchoring Wedge Clamp is a common hardware in powerline system. It is used to fix the line at the end bracket, suitable for the type 2 self-supporting insulated wire which is complied with national standards. We have many types of anchoring wedge clamp to match clients requirements. General Material-Body Aluminum Alloy Material-Bail Stainless Steel Material-Wedges Water Resistant  Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The p...