Kurungan
Braket adalah perkakasan biasa untuk sistem talian kuasa dan talian penghantaran. Mereka mempunyai pelbagai jenis, seperti braket transformer, mounting bracket, terminator bracket, arrester bracket, recloser bracket, bracket sekunder, cutout bracket, service deadend bracket dan post insulator bracket. kita dapat mengikut keperluan pelanggan untuk menyesuaikan.
Am
| Bahan-Badan | Keluli, Keluli Tahan Karat, Tembaga |
| Penamat | Panas Galvanize |
Spesifikasi pengapit regangan: terdapat dua sistem pengapit regangan asas, 1. Pengapit yang boleh dilepas, seperti pengapit tegangan jenis baji, bidal, pengapit tegangan jenis baut, dapat disesuaikan kemudian. 2. Pengapit yang tidak boleh dilepaskan, seperti pengapit terminal pemampatan yang mesti sama dengan panjang wayar. Jenis pengapit regangan adalah ll -1, ll -2, ll -3, ll -4, dll.
Dengan pengalaman luas dalam bidang ini, kami dapat membuat dan membekalkan perkakasan tiang berkualiti tinggi. Bahagian-bahagian ini digunakan untuk membina tiang dan tiang besar. Produk kami diperbuat daripada bahan berkualiti tinggi dan tahan lama. Perkakasan yang disediakan diperiksa dengan teliti setelah proses pembuatan untuk memastikan sifat kebal. Di samping itu, kemudahan pengangkutan kami yang luas membolehkan kami menyampaikan perkakasan tiang dalam jangka masa tertentu.
Skop kami merangkumi
Jalur bar boleh laras
Palam penebat
Simpan tali pinggang
Baut (mata bujur)
Skru lag
Pastikan Lebih Ketat
Anchor bolt (mata bidal)
Selak mata bujur
Tali leher (lurus / berpintal)
Selak jurulatih
Bolt (mata berganda)
Biji mata bujur
Skru kereta
Kurungan rod sebelum bidal
Peluang mata
Pemegang penebat pos
Selak mata bidal
Lintas tangan anda
Rak ganti (dua wayar)
Mata biar dibiarkan
Sokongan besi D (bolt dan mur)
Kerangka sekunder (tiga wayar)
Biji mata yang nipis
Sokongan besi D (pin, pin)
Papan bahagian / terminal
Kami sentiasa memberi perhatian kepada kualiti produk kami. Semua penebat tunduk pada standard IEC atau ANSI 100% ketat. Kami menjamin bahawa harga produk yang layak sebelum keluar adalah 100%. Produk yang dieksport ke Amerika Syarikat, Inggeris, Vietnam, Itali, Rusia, Yunani, Argentina, Chile dan negara dan wilayah lain. Untuk memastikan kualiti produk, syarikat telah lulus sertifikasi sistem pengurusan kualiti ISO9001: 2008, di dalam dan luar negeri pelanggan untuk memenangkan reputasi yang baik.
Sikap layanan yang baik, masa tindak balas yang cepat, penyampaian tepat pada waktunya, tanggungjawab dan fleksibiliti adalah perkara yang telah kita amalkan sejak awal. Harga yang kompetitif, kualiti yang baik dan penghantaran tepat pada masanya. Semua ini disediakan oleh kami. Kami harap anda berminat dengan produk kami dan dialu-alukan untuk bekerjasama dengan anda untuk kepentingan bersama.
Produk Berkaitan
-
D-Bracket / D-Besi
Specification: D- Bracket is a common hardware in powerline and transmission line system, it also called D-Iron. It normally used with insulators. D-Bracket has many different types, we are able to customize it according to clients requirements. Material-Body Steel Finishing Hot Dip Galvanize Strain clamp specification: there are two basic strain clamp systems, 1. Detachable clamps, such as wedge type tension clamps, thimble, bolt type tension clamps, can be adjusted later. 2. Non-det...
-
Clevis Tongue atau Clevis Eye
Clevis Tongue is a common hardware in powerline and transmission line system. It can be used to connect suspension clamps to other fittings and provide for motion. It can be forging or casting type. We are able to customize according to clients requirement. General Material-Body Steel Material-Pin (Clevis) Galvanized Steel Material- Pin (Cotter) Stainless Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize We always pay great attention to the quality of our prod...
-
Socket clevis
Specification: Socket clevis is a very integral component of pole line technology. It is commonly used on overhead lines, transmission lines, and power lines. It is a major component in pole line hardware which usually connects the socket type insulator and the tension clamp. General Material-Body Steel Material- Bolt / Pin (Clevis) Galvanized Steel Material- Pin (Cotter) Stainless Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize With our extensive experience...
-
Batang Penambat Thimble
Thimble eye, Twin eye and Triple eye drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. Square nut assembled to rod. General Material-Body Steel Finishing Hot Dip Galvanize With our extensive experience in this field, we are able to manufacture and supply high quality pole-line hardware. These parts are used to build huge poles and pylons. Our products are made o...
-
Selak Ekor Babi
Pigtail bolt is designed for use on wooden pole, concrete or other power line poles to hang the dead end clamp or suspension clamp. They are threaded at one end, whilst the other end is hot worked to form a pigtail-shaped eyebolt. They are also used alongside electrical telephone cable and chain type handrails. General Material-Body Steel, Stainless Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize With our extensive experience in this field, we are able to manufa...
-
Plat Yoke
Yoke Plate is a common hardware for any construction field. It is also the major parts of powerline and transmission system. We have many different types of Yoke plate, which are made by high grade steel. We also provide customize service for our clients to match their requirement. Material-Body Steel Finishing Hot Dip Galvanize With our extensive experience in this field, we are able to manufacture and supply high quality pole-line hardware. These parts are ...
