Strain Clamp

Short Description:

Specifications: Strain clamps are used to fix conductors and ground wires to insulators or link fittings to tower arms and substation structures. There are two basic systems of strain clamps, 1. Detachable clamps, such as wedge-type tension clamps, thimbles, bolted type tension clamps, which allow for subsequent adjustment. 2. Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length. The type of strain clamps are including NLL-1, NLL-2...


Product Detail

Product Tags

Specifications:

Strain clamps are used to fix conductors and ground wires to insulators or link fittings to tower arms and substation structures.

There are two basic systems of strain clamps,

1. Detachable clamps, such as wedge-type tension clamps, thimbles, bolted type tension clamps, which allow for subsequent adjustment.

2. Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length.

The type of strain clamps are including NLL-1, NLL-2, NLL-3, NLL-4 and so on.

General

Material-Body Aluminum Alloy, Steel
Material-Bolt Galvanized Steel

ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or large grips.

DX engineering part no. Roh-3-8thh casing 3/8 inch. Size with openings working 1/4 or 5/16 inches. HS or EHS cable.

Whether you are replacing an existing guy rope or doing a new installation, the ROHN 3/8thh guy rope sleeve from the DX works will help increase the safety and life of your tower.

NLD series bolt strain tongs are mainly used for station power lines or substations, stationary transmission lines and lightning rods, and can also be used to connect hardware or lightning rods to support rod connection strain insulators. According to the different structure and installation, it can be divided into bolt type and compression type. And the compression type is divided into hydraulic type and detonation type.

According to the usage, the static hoisting end chuck includes the cable end chuck, the prefabricated end chuck on the conductor and the prefabricated end chuck on the ground. Cable preforms are widely used in fixed end bars. The cable is preformed to connect the insulator or anchor rod.

The material of the end grip is aluminum wire, galvanized steel wire, aluminum clad steel wire, etc. The preformed end grip material is the same as the conductor material.

There are many types of wire clips of different colors due to the variation of wire diameters.

Strain Clamp01

Strain Clamp02


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Piercing Clamp

      Piercing Clamp

      Specification: General of insulation piercing connector (IPC) 1.Piercing connector, simple installation, need not strip the cable coat. 2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5.Small electric connect...

    • Hot Line Tap Clamp

      Hot Line Tap Clamp

      Hot Line Tap Clamp is a common fittings in powerline and transmission line system. We have many types hot line tap clamp to match our clients’ requirements. General Material-Body Aluminum Alloy Material-Eye Bolt Stainless Steel Material-Eye Connector Bronze The technical specification This specification includes the design and construction of tension clamps for aluminum conductors at terminal and cross-sectional terminals. Clamps are suitable for use in tropical areas with maximum a...

    • PG Clamp

      PG Clamp

      Specification: PG clamp is known for parallel groove clamp, especially used in transmission line to hold transmission conductors in parallel. PG Clamp solutions offered provides for secure holding support of transmission conductors. These parallel groove clamps come with features like high corrosion-resistance, aluminum alloy construction in hot forged finish, stainless steel based bolts & nuts in hot-dip galvanized finish, corrosion protected washer support, pre...

    • Straight Clamp

      Straight Clamp

      Straight Clamp is a common hardware in powerline and transmission line system. We offer many types Straight Clamp for our clients. General Material-Body Aluminum Alloy Material-Bolt Galvanized Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or larg...

    • Preformed Line

      Preformed Line

      Preformed Line is a major hardware in powerline and transmission line system. We offer full type and sizes of preformed line for our clients. General Material-Body Galvanized Steel, Aluminum Alloy  Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires to poles or walls. The clamp consists of a body, a wedge and a movable and adjustable clamp or gasket. A core anchor clip is designed to support neutral messengers, and the wedge...

    • Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...