Suspension Clamp

Short Description:

Specification: Suspension clamps are used to hang conductors or ground wires to insulators or link fittings to tower arms and substation structures. Suspension clamps are made of Aluminum Alloy or Malleable Iron materials with various types. Custom size and requirements are available upon request. General Material-Body Aluminum Alloy, Steel Material-Bolt Galvanized Steel Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires ...


Product Detail

Product Tags

Specification:

Suspension clamps are used to hang conductors or ground wires to insulators or link fittings to tower arms and substation structures. Suspension clamps are made of Aluminum Alloy or Malleable Iron materials with various types. Custom size and requirements are available upon request.

General

Material-Body Aluminum Alloy, Steel
Material-Bolt Galvanized Steel

Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires to poles or walls. The clamp consists of a body, a wedge and a movable and adjustable clamp or gasket.

A core anchor clip is designed to support neutral messengers, and the wedge can self-adjust. The lead or street lamp lead is next to the clip. The feature of self-opening is the integration of spring device to facilitate the insertion of wire into the fixture.

Standard :NFC 33-041.

features

Toolless installation, wedge slide in valve body.

Easy to open bail permit holder and braid.

Adjustable length of bail in three steps.

material

The clamp body is made of weather-resistant, ultraviolet-resistant polymer or aluminum alloy material with polymer wedge core.

Adjustable connecting rod made of hot dip galvanized steel (FA) or stainless steel (SS).

NLD series bolt strain tongs are mainly used for station power lines or substations, stationary transmission lines and lightning rods, and can also be used to connect hardware or lightning rods to support rod connection strain insulators. According to the different structure and installation, it can be divided into bolt type and compression type. And the compression type is divided into hydraulic type and detonation type.

Suspension Clamp01

Suspension Clamp02

Suspension Clamp03

Suspension Clamp04

Suspension Clamp05

Suspension Clamp06

Suspension Clamp07

Suspension Clamp08


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Piercing Clamp

      Piercing Clamp

      Specification: General of insulation piercing connector (IPC) 1.Piercing connector, simple installation, need not strip the cable coat. 2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5.Small electric connect...

    • Preformed Line

      Preformed Line

      Preformed Line is a major hardware in powerline and transmission line system. We offer full type and sizes of preformed line for our clients. General Material-Body Galvanized Steel, Aluminum Alloy  Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires to poles or walls. The clamp consists of a body, a wedge and a movable and adjustable clamp or gasket. A core anchor clip is designed to support neutral messengers, and the wedge...

    • Cable Lug

      Cable Lug

      Cable lug is designed that can hold a different type of wires so that your electrical connection will be easier. This allows you to connect thick cables to a connector with a smaller diameter you possibly have. Safer Connection. Cable Lug was invented so that it ensures the electrician and the users’ safety. We have full type and size of cable lug for our clients. General Material-Body Aluminum Alloy, Copper A core anchor clip is designed to support neutral mes...

    • Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...

    • Straight Clamp

      Straight Clamp

      Straight Clamp is a common hardware in powerline and transmission line system. We offer many types Straight Clamp for our clients. General Material-Body Aluminum Alloy Material-Bolt Galvanized Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or larg...

    • Hot Line Tap Clamp

      Hot Line Tap Clamp

      Hot Line Tap Clamp is a common fittings in powerline and transmission line system. We have many types hot line tap clamp to match our clients’ requirements. General Material-Body Aluminum Alloy Material-Eye Bolt Stainless Steel Material-Eye Connector Bronze The technical specification This specification includes the design and construction of tension clamps for aluminum conductors at terminal and cross-sectional terminals. Clamps are suitable for use in tropical areas with maximum a...