Tension Dead End Anchor Clamp

Short Description:

Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...


Product Detail

Product Tags

Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements.

General

Material-Body Steel
Material-Bolt Galvanized Steel

Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the limited space under the wheel arch. After a complete test, we provide these fixtures to the customer.

Features:

- corrosion

- easy to use

- durability

NLD series bolt strain tongs are mainly used for station power lines or substations, stationary transmission lines and lightning rods, and can also be used to connect hardware or lightning rods to support rod connection strain insulators. According to the different structure and installation, it can be divided into bolt type and compression type. And the compression type is divided into hydraulic type and detonation type.

According to the usage, the static hoisting end chuck includes the cable end chuck, the prefabricated end chuck on the conductor and the prefabricated end chuck on the ground. Cable preforms are widely used in fixed end bars. The cable is preformed to connect the insulator or anchor rod.

The material of the end grip is aluminum wire, galvanized steel wire, aluminum clad steel wire, etc. The preformed end grip material is the same as the conductor material.

There are many types of wire clips of different colors due to the variation of wire diameters.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • PG Clamp

      PG Clamp

      Specification: PG clamp is known for parallel groove clamp, especially used in transmission line to hold transmission conductors in parallel. PG Clamp solutions offered provides for secure holding support of transmission conductors. These parallel groove clamps come with features like high corrosion-resistance, aluminum alloy construction in hot forged finish, stainless steel based bolts & nuts in hot-dip galvanized finish, corrosion protected washer support, pre...

    • Hot Line Tap Clamp

      Hot Line Tap Clamp

      Hot Line Tap Clamp is a common fittings in powerline and transmission line system. We have many types hot line tap clamp to match our clients’ requirements. General Material-Body Aluminum Alloy Material-Eye Bolt Stainless Steel Material-Eye Connector Bronze The technical specification This specification includes the design and construction of tension clamps for aluminum conductors at terminal and cross-sectional terminals. Clamps are suitable for use in tropical areas with maximum a...

    • Cable Lug

      Cable Lug

      Cable lug is designed that can hold a different type of wires so that your electrical connection will be easier. This allows you to connect thick cables to a connector with a smaller diameter you possibly have. Safer Connection. Cable Lug was invented so that it ensures the electrician and the users’ safety. We have full type and size of cable lug for our clients. General Material-Body Aluminum Alloy, Copper A core anchor clip is designed to support neutral mes...

    • Strain Clamp

      Strain Clamp

      Specifications: Strain clamps are used to fix conductors and ground wires to insulators or link fittings to tower arms and substation structures. There are two basic systems of strain clamps, 1. Detachable clamps, such as wedge-type tension clamps, thimbles, bolted type tension clamps, which allow for subsequent adjustment. 2. Non-detachable clamps, such as compression dead-end clamps which require absolute matching to the conductor length. The type of strain clamps are including NLL-1, NLL-2...

    • Straight Clamp

      Straight Clamp

      Straight Clamp is a common hardware in powerline and transmission line system. We offer many types Straight Clamp for our clients. General Material-Body Aluminum Alloy Material-Bolt Galvanized Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or larg...

    • Anchoring Wedge Clamp

      Anchoring Wedge Clamp

      Anchoring Wedge Clamp is a common hardware in powerline system. It is used to fix the line at the end bracket, suitable for the type 2 self-supporting insulated wire which is complied with national standards. We have many types of anchoring wedge clamp to match clients requirements. General Material-Body Aluminum Alloy Material-Bail Stainless Steel Material-Wedges Water Resistant  Customer demand is growing, so we are committed to providing a wide range of ...