Products

  • Glass Insulators

    Glass Insulators

    Specification Standard glass insulator, Anti-Fog/Anti-Pollution glass insulator, Aerodynamic glass insulator all could be supplied in our company, if you have any demand for the Anti-fog/Anti-Pollution toughened glass insulator, please contact us freely. Glass insulator Glass insulators are made of tempered glass of the highest quality, unadulterated and air inclusions. They are suitable for high-voltage lines aerated. We offer glass cap insulators, supporting insulators and high-strength gla...

  • Suspension Clamp

    Suspension Clamp

    Specification: Suspension clamps are used to hang conductors or ground wires to insulators or link fittings to tower arms and substation structures. Suspension clamps are made of Aluminum Alloy or Malleable Iron materials with various types. Custom size and requirements are available upon request. General Material-Body Aluminum Alloy, Steel Material-Bolt Galvanized Steel Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires ...

  • Socket Clevis

    Socket Clevis

    Specification: Socket clevis is a very integral component of pole line technology. It is commonly used on overhead lines, transmission lines, and power lines. It is a major component in pole line hardware which usually connects the socket type insulator and the tension clamp. General Material-Body Steel Material- Bolt / Pin (Clevis) Galvanized Steel Material- Pin (Cotter) Stainless Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize With our extensive experience...

  • Shackle

    Shackle

    Specifications: A shackle, is a U-shaped piece of metal secured with a clevis pin or bolt across the opening, or a hinged metal loop secured with a quick-release locking pin mechanism. Shackles are the primary connecting link in all manner of rigging systems, from boats and ships to industrial crane rigging, as they allow different rigging subsets to be connected or disconnected quickly. We have many types shackle, and we also do customize for our clients to match their requirements. General ...

  • Fuse Cutout

    Fuse Cutout

    Specification A fuse cutout or cut-out fuse is a combination of a fuse and a switch, used in primary overhead feeder lines and taps to protect distribution transformers from current surges and overloads. An over current caused by a fault in the transformer or customer circuit will cause the fuse to melt, disconnecting the transformer from the line. It can also be opened manually by utility linemen standing on the ground and using a long insulating stick called a “hot stick”. Featu...

  • Ball Clevis

    Ball Clevis

    Ball clevis is an accessory you can use in attaching or connecting ball and socket insulators to other linked tower hardware. It can be forging or casting. You can connect socket insulator or socket tongues by ball heads, such as 52-3, 52-5, etc. At times, you can also refer to ball clevis as a clevis eye. They are common in transmission lines and poles. General Material-Body Steel Material-Pin (Clevis) Galvanized Steel Material- Pin (Cotter) Stainless Steel Strength Rating 70KN, 120...

  • Stay Insulator

    Stay Insulator

    Porcelain Stay Insulators Our Stay Insulators include 54-1, 54-2, 54-3, 54-4 and so on. Standard: IEC, ANSI, BS, AS, DIN, GB and etc. Color: brown, gray, sky blue and etc. Ceramic insulator is also called porcelain vase. Disc ceramic insulators are designed as strings, usually two or more, providing higher voltage protection than any single insulator. Ceramic disc insulators are commonly used in high-voltage transmission towers, as shown in the figure below. Ceramics are by far the most commo...

  • Hot Line Tap Clamp

    Hot Line Tap Clamp

    Hot Line Tap Clamp is a common fittings in powerline and transmission line system. We have many types hot line tap clamp to match our clients’ requirements. General Material-Body Aluminum Alloy Material-Eye Bolt Stainless Steel Material-Eye Connector Bronze The technical specification This specification includes the design and construction of tension clamps for aluminum conductors at terminal and cross-sectional terminals. Clamps are suitable for use in tropical areas with maximum a...

  • Tension Dead End Anchor Clamp

    Tension Dead End Anchor Clamp

    Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...

  • Strap

    Strap

    Strap is a common hardware for any construction field. It is also the major parts of powerline and transmission system. We have many different types of strap, which are made by high grade steel. We also provide customize service for our clients to match their requirement. Material-Body Steel Finishing Hot Dip Galvanize With our extensive experience in this field, we are able to manufacture and supply high quality pole-line hardware. These parts are used to build huge poles and pylons....

  • Thimble Nut

    Thimble Nut

    Thimble Nuts. Commonly used in the powerline and transmission line system, thimble nuts are internally threaded fasteners used for lifting and securing cables, wires and chains. Eye nuts are made from forged carbon steel. In addition to the structural material, choose the thread dimensions and, if relevant, the working load limit to fit your application. General Material-Body Steel Strength Rating 70KN, 120KN, 180KN Finishing Hot Dip Galvanize We always pay great attention to the qu...

  • Composite Insulator

    Composite Insulator

    Specification A composite insulator, also called a dielectric or nonconductor, is a material that resists the flow of electric current. This type of silicone rubber material is used in parts of electrical equipment intended to support or separate electrical conductors without passing current through itself. The term is also used more specifically to refer to insulating supports that attach electric power transmission wires to utility poles or pylons. Composite insulators are less costly, ligh...

12345 Next > >> Page 1 / 5