Thimble Guy

Short Description:

The guy thimble is widely used on electric power line or dead-end pole line. The cable thimble usually connects with the preformed tension clamp to support and protect the ADSS/OPGW cable. It is also used on stay rod to connect the guy wire. General Material-Body Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel fo...


Product Detail

Product Tags

The guy thimble is widely used on electric power line or dead-end pole line. The cable thimble usually connects with the preformed tension clamp to support and protect the ADSS/OPGW cable. It is also used on stay rod to connect the guy wire.

General

Material-Body Steel

ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or large grips.

DX engineering part no. Roh-3-8thh casing 3/8 inch. Size with openings working 1/4 or 5/16 inches. HS or EHS cable.

Whether you are replacing an existing guy rope or doing a new installation, the ROHN 3/8thh guy rope sleeve from the DX works will help increase the safety and life of your tower.

Guy thimble is also known as cable thimble and is used on the pole strap as an interface accessory to connect Guy grip or Guy wire. Cover type thimble is widely used in power line or terminal pole. To support and protect the ADSS/OPGW cable, the cable sleeve is usually connected to a preformed taut clamp.

The static cable sleeve is usually assembled as an accessory. It is also used on the tie rod to connect the tie wire. The cable sleeve is simple in structure and small in volume. The golden sun guy thimble is curved, with a smooth internal profile, suitable for all sizes of steel wire. Smooth curved channels are designed to prevent stress from concentrating at the point.

Depending on the size of the strands, there are many types you can choose from.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Cable Lug

      Cable Lug

      Cable lug is designed that can hold a different type of wires so that your electrical connection will be easier. This allows you to connect thick cables to a connector with a smaller diameter you possibly have. Safer Connection. Cable Lug was invented so that it ensures the electrician and the users’ safety. We have full type and size of cable lug for our clients. General Material-Body Aluminum Alloy, Copper A core anchor clip is designed to support neutral mes...

    • PG Clamp

      PG Clamp

      Specification: PG clamp is known for parallel groove clamp, especially used in transmission line to hold transmission conductors in parallel. PG Clamp solutions offered provides for secure holding support of transmission conductors. These parallel groove clamps come with features like high corrosion-resistance, aluminum alloy construction in hot forged finish, stainless steel based bolts & nuts in hot-dip galvanized finish, corrosion protected washer support, pre...

    • Preformed Line

      Preformed Line

      Preformed Line is a major hardware in powerline and transmission line system. We offer full type and sizes of preformed line for our clients. General Material-Body Galvanized Steel, Aluminum Alloy  Anchor clips are used to secure insulated mains with 4 wires to poles or insulated service lines with 2 or 4 wires to poles or walls. The clamp consists of a body, a wedge and a movable and adjustable clamp or gasket. A core anchor clip is designed to support neutral messengers, and the wedge...

    • Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp

      Tension Dead End Anchor Clamp is a common hardware in powerline and transmission line system. We offer many types and sizes of Anchor Clamp which will match our clients requirements. General Material-Body Steel Material-Bolt Galvanized Steel Customer demand is growing, so we are committed to providing a wide range of suspension fixtures. The products we provide to our customers are of high quality. This double suspension clip is widely used to safely remove the helical spring from the...

    • Piercing Clamp

      Piercing Clamp

      Specification: General of insulation piercing connector (IPC) 1.Piercing connector, simple installation, need not strip the cable coat. 2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5.Small electric connect...

    • Straight Clamp

      Straight Clamp

      Straight Clamp is a common hardware in powerline and transmission line system. We offer many types Straight Clamp for our clients. General Material-Body Aluminum Alloy Material-Bolt Galvanized Steel ROHN 3/8thh guy rope sleeve is used to protect guy rope from friction. They feature large wire holder diameters to assist cable terminals without risk of cutting or kinking. The ROHN thimble is made of galvanized steel for maximum durability. It is recommended to be used with tongs or larg...